球轴承点接触区油膜阻尼系数的计算与理论分析
- 文件大小:629.64KB
- 浏览次数:
- 发布时间:2014-03-14
本资料包含pdf文件1个,下载需要1积分
Based on point contact elastohydrodynamic lubrication (EHL)equation, the calculation model of oil-film damping on point contact area of ball bearing was re-deduced, and the model equation was compared with the point contact pure squeeze EHL equation. According to the relationship between this calculation model solution and EHL equation solution, a new method for solving this model was proposed. A revise equation was deduced considering ball bearing contact characteristic and thermal effect, and the boundary conditions were given for calculation. The solutions of the damping calculation model correspond to the theoretical predict results,which shows the dependability of this model. The effects of lubricant entrainment velocity and initial viscosity, and the contact load on oil-film damping were analyzed. The results show that the oil-film damping is decreased with the increase of lubricant entrainment velocity or lubricant initial viscosity, and increased with the increase of contact load.基于弹性流体动力润滑方程,重新推导球轴承点接触区油膜阻尼系数的计算模型。对比分析该模型方程与纯挤压情况下的拟稳态点接触弹流动力润滑方程,并依据模型方程解与考虑振动的弹流动力润滑方程解之间的关系,提出新的求解方法及过程,给出考虑热效应和球轴承点接触特点的修正计算模型,确定迭代边界条件并进行求解。结果表明,模型解与理论预测结果相符,证明该模型计算结果具有可信性。分析各因素对油膜阻尼黏度系数的影响,表明油膜黏度阻尼系数随接触面间润滑油卷吸速度、润滑油初始黏度的增大而减小,随接触区法向载荷的增大而增大。
- 1GB/T 12452-2008 企业水平衡测试通则
- 2远距离供排水管道水头损失计算公式选用
- 3NB/SH/T 0847-2010 极压润滑油摩擦磨损性能的测定SRV试验机法
- 4一套别墅图(8张)
- 5水泵房、水池工程土方开挖、井点降水方案
- 6GB/T 4107-2004 镁粉松装密度的测定 斯科特容量法
- 7唢呐设计图纸inventor设计
- 82层别墅全套CAD设计图
- 9JIS L0854-2001 Test method for colour fastness to transfer of dye
- 10GB/T 15183-1994 按能力批准评定质量的电子设备用电源变压器分规范
- 11LED原理培训教程
- 12A变更图
- 13水利工程施工机械台时费定额(2002年)(修订版)
- 14现代国际展览中心景观绿化设计施工图
- 15预算经验心得1